EPUTEC Pipe Cleaning Nozzles

NEW: Rotating Root Cutter Nozzle in 2 Sizes

Field of application: Eliminates even hard-to-reach roots in pipes.

The new root cutter nozzle is a powerful cutter nozzle with 6 rear jets. It can be supplied in 2 sizes with adaptable application ranges of 50 – 160 mm (¼” thread) or 90 – 200 mm (½” thread). The powerful stainless steel Root Cutter nozzle is used for scraping roots from inside the pipe. It removes even hard-to-reach roots effortlessly. Without skids.

NEW: Vibration Nozzle in 3 Variants

Field of application: Strong, vibrating nozzles to remove hard deposits, cement and lime in the pipe.

The vibration nozzle is suitable for various pipe diameters from 50 mm / from 90 mm / from 160 mm, depending on the version (mini, light or heavy). The high-quality stainless steel nozzles with 1/4″ and 1/2″ thread powerfully removes hard deposits.

NEW: FLOUNDER Pipe Cleaning Nozzle, 1/2″ – 1″

Field of application: Removal of sand, mud and debris in pipes and channels of 125 – 400 mm (1/2″) and 250 – 700 mm (1″).

The flounder drain cleaning nozzle is available in 3 versions. The lighter nozzle made of aluminum with a weight of 1 kg and 1/2″ connection thread is suitable for smaller flushing systems (from 40 l/min). The heavier 3 kg version with 1/2″ thread has a stronger water flow rate of 80 l/min.

The 1″ version of the flounder pipe cleaning nozzle has 8 reflectors (instead of 4) and a water flow from 200 l/min with a weight of 9 kg. Optional swivel joints can be ordered for all nozzles.

Thread: 1/2″ / 1″
Pipe cleaning nozzle for pipe diameter: 125 – 400 mm / 250 – 700 mm
Rear nozzle: 4 / 8
Water flow: ab 40 l/min / ab 80 l/min / ab 200 l/min
Dimensions (mm): 90 x 150 / 145 x 225
Weight: 1 kg / 3 kg / 9 kg

NEW: Rotating WIPECATCHER Nozzle, 1/2″

Field of application: Removal of wet wipes, paper and small plastic items from clogged pipes.

The rotating Wipecatcher nozzle with 1/2″ connection thread is an improved drain cleaning nozzle for the application range 75 – 200 mm.

Rear nozzle: 6 x 15° jet angle
Water flow rate: from 40 l/min.
Dimensions (mm): 35 x 65
Weight: 0.3 kg

GRENADE Sewer Nozzle, 1/2″ – 5/4″

Field of application: Cleaning and flushing of sewer systems. Removal of waste, sand and stones from the sewer system.

The pipe cleaning nozzle for routine cleaning work in sewers and pipes in diameters from 100 – 800 mm. Different designs from 1/2″ up to 5/4″ are suitable for different pipe diameters, see Technical Details. Garnet pipe cleaning nozzles have different jet angles in order to be able to effectively transport waste and residues out of the pipe with their concentrated jet effect during retraction.

TARANTULA Rotary Nozzle, 1/4″ – 1″

Field of application: Rotating nozzle for removing heavy debris, grease, soap and small roots.

The Tarantula is a slow rotating cleaning nozzle with 2 concentrated rear nozzles (and optionally another in front). Since the rotating nozzle is magnetically braked, it removes even stubborn deposits and residues as well as root tangles. Depending on the size, it is suitable for pipe diameters of 90 – 600 mm, see Technical Details.

ALIEN Rotating Jet Draw Nozzle, 1/2″ – 1″

Field of application: Pipe cleaning nozzle for clogged pipes and for cutting small roots, even in pipe bends.

The Alien is a powerful front jet nozzle with up to 6 nozzle inserts. Due to the powerful rotating jet at a 20° angle, the nozzle dissolves even stubborn blockages in pipes and ducts. Depending on the size, it is suitable for pipe diameters of 90 – 500 mm, see Technical Details. In the 1/2″ version, there is also a turbo variant with an even 30% stronger front jet.

3-EDGE-NOZZLE Poking Nozzle, 1/4″ – 1″

Field of application: Poke nozzle for stubborn blockages, rooting and icing in pipelines.

The 3-edge nozzle is an extremely powerful poking nozzle that breaks up even the toughest pipe clogs. With up to 6 rear sliding nozzles and 3 front nozzles, this pipe cleaning nozzle achieves an enormously large drilling capacity even under severe conditions. Depending on the size, it is suitable for pipe diameters of 40 – 500 mm, see Technical Details.

ANACONDA Steering Nozzle, 1/4″ – 1/2″

Field of application: Steering nozzle for cleaning angled and curved pipelines, branches, joints and soles

The side jet pushes the steering nozzle to the wall of the pipe, making it steerable in curves and branches and over soles. The ceramic back jets are strong enough to clean the pipe. The steering nozzle has 6 ceramic back jets in 15° jet angle.  Depending on the size, it is suitable for pipe diameters of 40 – 200 mm, see Technical Details.

VAMPIRE Pipe Cleaning Nozzle, 1/2″ – 1″

Field of application: Powerful pipe cleaning nozzle for cleaning large pipes. It removes stubborn blockages and rooting and removes sand and stones from pipes.

The Vampire Cleaning Nozzle cleans with 6 back jets at 35° angle and an optional pre-jet very effectively pipes in the range of 150 – 400 mm, see Technical Details.

BULLET Jacking Nozzle, 1/2″

Field of application: Powerful pipe cleaning nozzle with maximum propulsion – removes stronger pipe blockages even on longer distances.

The Bullet cleaning nozzle cleans pipes in the pipe diameter range of 110 – 250 mm very effectively with 3 rear nozzles.

Rear nozzle: 3 x M6
Water flow: from 40 l/min.
Dimensions (mm): 47 x 82
Weight: 0,6 kg

WIPE CATCHER Hook Nozzle, 1/2″

Field of application: Removal of wet wipes, paper and small plastic items from clogged pipes.

The Wipe Catcher hook nozzle is a special barbed pipe cleaning nozzle. With its reduced size and high performance, the hook nozzle cleans pipes in diameter of 75 – 200 mm effectively and cleanly.

Rear nozzle: 6 x 15° jet angle.
Water flow rate: from 40 l/min.
Dimensions (mm): 30 x 50
Weight: 0.1 kg

LUCHS Pipe Cleaning Nozzle For Large Profiles, 1/2″

Field of application: Pipe cleaning in large profiles from 160 – 300 mm.

Thread: 1/2″
Pipe cleaning nozzle for pipe diameter: 160 – 300 mm
Rear nozzle: 3 x M8
Water flow: from 40 l/min.
Dimensions (mm): 64 x 115

BASIC EGG Nozzle Allround Cleaning Nozzle, 3/4″

Field of application: Cheap and practical allround nozzle with 3/4″ connection thread for daily work with clogged pipes. 6 reflectors with 15° jet angle.

Thread: 3/4″
Pipe cleaning nozzle for pipe diameter: 160 – 300 mm.
Rear nozzle: 6 emitters 15 °.
Water flow: from 160 l/min.
Dimensions (mm): 50 x 67
Weight: 0,43 kg

VENTURI Nozzle, 1/2″

Field of Application: Cleaning and flushing out water from clogged pipes and pipelines.

BUTTON Nozzle Cleaning Nozzle, 1/2″

Field of Application: Button nozzle for cleaning pipes of size 75 – 160 mm.

Smallest 1/2″ pipe cleaning nozzle with 6 x M4 emitters at the back.

MINI Nozzle Pipe Cleaning Nozzle, 1/8″ – 1/4″

Field of Application: Small pipe cleaning work with 1/4″ or 1/8″ connection.

Connection thread: 1/8″ / 1/4″
Range of application: 40 – 75 mm / 40 – 110 mm
Emitters: 3 / 5
Water flow: from 30 l/min.
Dimensions (mm): 16 x 17 / 18 x 27
Weight: 30g / 50 g

Manhole Cleaning Nozzle Pipe Cleaning Nozzle, 1/2″ / 3/4″ / 1″

Field of Application: Shaft with 1/2″ / 3/4″ / 1″ connection.

Connection thread: 1/2″ / 3/4″ / 1″
Emitters: 3
Dimensions (mm): 27 x 15 / 27 x 19 / 27 x 25
Weight: 1,7 kg / 2,4 kg / 4,7 kg